International Rectifier Introduces New iPOWIR™ "Building Block" for Full-Function, 15A Single-Output Synchronous Buck Converters
EL SEGUNDO, Calif. - April 2005 -- International Rectifier, IR®(NYSE: IRF), a world leader in power management technology, today introduced the iPOWIR™ iP1203, a fully-optimized, full-function 15A single output synchronous buck converter device that achieves over 90% efficiency at full load. The iP1203 is a flexible solution that addresses requirements from 5.5Vin to 13.2Vin and 0.8Vout to 8Vout, maintaining a full load capability of 15A.
The new power building block is designed to simplify DC-DC point-of-load (POL) converters for network processor units (NPUs) and ASIC power rails within networking and telecommunication systems. The iP1203 is ideal for use in two-stage distributed power architectures being fed from either a regulated isolated brick or an unregulated DC bus converter.
"Offering superior power density, the iP1203 building block integrates a full-function PWM control IC, trench MOSFETs and passive components enabling excellent thermal performance at raised ambient temperature without de-rating," said Carl Smith, Marketing Manager for Networking and Telecommunication Products at International Rectifier.
"The device incorporates the most critical sync buck power functions so that designers do not have to worry about component selection or board layout," Smith added.
The iP1203 addresses important networking and telecommunications power system requirements such as hiccup over-current, over-temperature and over-voltage protection, external synchronization, power good and soft start. The building block is housed in a land grid array (LGA) package measuring 9mm x 9mm x 2.3mm. The iP1203 uses thermally-enhanced mold compound, enabling dual-sided cooling capability and very low junction-to-case and junction-to-PCB thermal resistance for maximum current handling.
The iPOWIR™ Family
iPOWIR™ products simplify power supply design, enabling faster time to market and reduces board space by up to 56% and significantly minimizes circuit parasitics when compared to discrete solutions.
Part Number |
Package |
VIN |
VOUT |
IOUT |
Operating Frequency |
iP1203 |
9mm x 9mm x 2.6mm LGA |
5.5V - 13.2V |
0.8V - 8.0V |
15A max |
200kHz - 400kHz |
Design Assistance and Application Notes
IRDCiP1203-A: 400kHz, 15A synchronous buck converter reference design using iP1203
MyPower.irf.com: Web-enabled Spice circuit simulation for iP1203
AN-1028: Recommended Design, Integration and Rework Guidelines for IR's iPOWIR Technology BGA and LGA Packages
AN-1029: Optimizing PCB Layout for an iPOWIR Technology Design
AN-1030: Applying iPOWIR Products in Your Thermal Environment
AN-1047: Graphical Solution to Two-Branch Heatsinking Safe Operating Area
Availability and Pricing
The new iP1203 in the LGA package is available immediately. The iP1203TR is supplied in 1,000 pieces per tape and reel package. Pricing is US $5.75 each in 1,000-unit quantities. Prices are subject to change.
|