IR’s SmartRectifier™ IC Increases System Efficiency 1.5 Percent; Reduces Rectifier Device Temperature by 25 Degrees Celsius; Shrinks PCB Size by Two Thirds

EL SEGUNDO, Calif. — International Rectifier, IR® (NYSE: IRF), a world leader in power management technology, today expanded its family of SmartRectifier™ ICs with the introduction of the IR1168 for AC-DC power converters for high-end LCD TVs.

The 200V dual smart secondary-side rectifier driver IC is designed to drive two N-Channel power MOSFETs used as synchronous rectifiers (SR) in resonant half-bridge topologies. In contrast to traditional current transformer SR methods, the IR1168 accurately determines turn-on and turn-off based on MOSFET drain sensing voltage in close proximity to zero current transition, eliminating the need for additional components to simplify design.

“While synchronous rectification provides significant energy savings compared to diode-based designs, traditional SR methods are complex and require a high component count. Using only two gate resistors and a supply capacitor, the IR1168 delivers a lower system temperature and increased power density for even greater efficiency and reliability than existing SR methods while simplifying design and drastically reducing component count to shrink PCB size,” said Tom Ribarich, director, IR’s Energy Saving Products Business Unit.

Co-designed with IR’s DirectFET® MOSFETs, which feature IR’s latest Trench silicon and packaging technology, the IR1168-based solution delivers an efficiency improvement of 1.5% for a standard 240W LCD TV SMPS and a reduction of rectifier device temperature of 25°C while shrinking board size by two thirds.

The IR1168, featuring IR’s proprietary high-voltage IC technology, supports burst mode operation to deliver efficiency benefits even at light loads. Ruggedness and noise immunity are accomplished using an advanced blanking scheme and double-pulse suppression that allows reliable operation in fixed and variable frequency applications. Other key features include maximum 500kHz switching frequency, anti-bounce logic and UVLO protection, 4A peak turn-off gate drive current, micropower start-up and ultra low quiescent current, 10.7V gate drive clamp, 70ns turn-off propagation delay and a wide Vcc operating range from 8.6V to 18V.

Specifications:

SmartRectifier™ ICs

Part Number Package Voltage Sw. Freq. Max.
(kHz)
Vcc min Vcc max Iout VGate Clamp
(V)
IR1168SPbF SO-8 200 V 500 8.6 V 18 V + 1 A/ -4 A 10.7 V
IR1168STRPbF SO-8 200 V 500 8.6 V 18 V + 1 A/ -4 A 10.7 V

DirectFET® MOSFETs

Part Number Package VBRDSS
(V)
RDS(on) Max 10V
(mOhms)
Qg Typ
(nC)
Qgd Typ
(nC)
IRF6648 DirectFET MN 60 7.0 36.0 14.0
IRF6646 DirectFET MN 80 9.5 36.0 12.0
IRF6668 DirectFET MZ 80 15.0 22.0 7.8
IRF6644 DirectFET MN 100 13.0 35.0 11.5
IRF6662 DirectFET MZ 100 22.0 22.0 6.8
IRF6645 DirectFET SJ 100 35.0 14.0 4.8
IRF6655 DirectFET SH 100 62.0 8.7 2.8
IRF6643 DirectFET MZ 150 34.5 39.0 11.0
IRF6641 DirectFET MZ 200 59.9 34.0 9.5

Standard MOSFETs

Part Number Package V(br)dss RDS(on)
IRFB3206PbF TO-220 60V 3mOhm
IRFB3306PbF TO-220 60V 4.2mOhm
IRF7855PbF SO-8 60V 9.4mOhm
IRFB3307PbF TO-220 75V 6.3mOhm
IRFB3507PbF TO-220 75V 8.8mOhm
IRF7854PbF SO-8 80V 13.4mOhm
IRFB4110PbF TO-220 100V 6.3mOhm
IRFB4310PbF TO-220 100V 7mOhm
IRFB4410PbF TO-220 100V 10mOhm
IRFB4610PbF TO-220 100V 14mOhm
IRF7853PbF SO-8 100V 18mOhm
IRFB4227PbF TO-220 200V 26mOhm

Availability and Pricing

Available in an 8-pin SOIC package, pricing for the IR1168SPbF begins at US $1.50 each in quantities of 10,000-units. Production quantities are available immediately. The devices are lead free and RoHS compliant. Prices are subject to change.