INTERNATIONAL RECTIFIER - THE POWER MANAGEMENT LEADER
Motor Control Reference Designs
International Rectifier offers a number of reference designs for AC Induction or Brushless Motor Motor Control applications. Each reference design kit includes a fully assembled and tested demo board along with applicable datasheets and application notes.
Download this overview for a full feature list of each kit.
Featured Kits
IRMD2336DJ
3-Phase Gate Driver IC Reference design
  • Featuring IRS2336DJPBF 3-phase gate driver IC
  • Complete 3-phase ac motor drive system to showcase IRS2336DJ gate driver IC operation
  • No extra hardware needed for PWM signal generation; Option to incorporate external PWM signals to drive IRS2336DJ if desired
  • GUI software for running Induction Motor in open loop Volts-per-Hertz mode of operation
  • Discrete IGBT power stage for maximum flexibility
    • IGBT’s rated for 10A @100oC
    • Short circuit rating 10 µs
    • TO220 Full-pak package
  • Conveniently located Test points for IRS2336DJ signal monitoring
IRMD26310DJ
3-Phase Gate Driver IC Reference design
  • Featuring IRS26310DJPBF 3-phase gate driver IC
  • Complete 3-phase ac motor drive system to showcase IRS26310DJ gate driver IC operation
  • No extra hardware needed for PWM signal generation; Option to incorporate external PWM signals to drive IRS26310DJ if desired
  • GUI software for running Induction Motor in open loop Volts-per-Hertz mode of operation
  • Discrete IGBT power stage for maximum flexibility
    • IGBT’s rated for 10A @100oC
    • Short circuit rating 10 µs
    • TO220 Full-pak package
  • Conveniently located Test points for IRS26310DJ signal monitoring
IRMCS3043
Complete permanent magnet synchronous motor design platform with input PFC control
  • Featuring IRMCF343 Digital Control IC
  • 230V/1800W input power rating with trench IGBT PFC transistor
  • Motor inverter uses IRAMX-16UP60A-2 rated for 6.0 Arms.
  • Sample 300W motor and PFC inductor for quick start
  • MCE Wizard tool for easy configuration
  • MCE Designer tool for control parameter tuning and performance evaluation
  • Software support files including 8051 sample code
  • Required third party 8051-code development tools not included
IRMCS3041
A complete permanent magnet synchronous motor design platform
  • Featuring IRMCF341 Digital Control IC- based system
  • 230V/400W output power with IRAMS10UP60B IPM
  • Sample 300W PMSM for quick-start
  • MCE Wizard tool for easy configuration
  • MCD Designer tool for control parameter turning and performance evaluation
  • Software support files including 8051 sample code
  • Required third-party 8051-code development tools not included

IRMCS3012
Dual permanent magnet synchronous motor design platform with input PFC control
  • Featuring IRMCF312 Digital Control IC
  • 230V/1800W input power rating with trench IGBT PFC transistor
  • Compressor motor output uses IRAMX-16UP60A-2 rated for 6.0 Arms.
  • Fan motor output limited to 0.9 A peak
  • Sample 300W and 50W motors and PFC inductor for quick start
  • MCE Wizard tool for easy configuration
  • MCE Designer tool for control parameter tuning and performance evaluation
  • Software support files including 8051 sample code
  • Required third party 8051-code development tools not included
IRMD22381Q
A complete AC and brushless motor driver used with a 30A power module
  • Featuring IR22381Q Three phase gate driver IC with advanced protection functions
  • High Current Gate Driver for AC Induction or Brushless Motors
  • Integrated desaturation detection circuit
  • 1200V DC-Bus Capability up to 50A
  • Compatible with standard ECONO2-6PACK IGBT module (Not included in design kit)
IRMD2214SS
High Current Gate Driver Reference design
  • Featuring IR2214SS half bridge gate driver IC
  • High Current Gate Driver for AC Induction or Brushless Motors
  • Integrated desaturation detection circuit
  • 1200V DC-Bus Capability up to 50A
  • Compatible with standard ECONO2-6PACK IGBT module (Not included in design kit)
IRMD22141SS
High Current Gate Driver Reference design
  • Featuring IR22141SS half bridge gate driver IC
  • High Current Gate Driver for AC Induction or Brushless Motors
  • Integrated desaturation detection circuit with active bias
  • 1200V DC-Bus Capability up to 50A
  • Compatible with standard ECONO2-6PACK IGBT module (Not included in design kit)

ARCHIVED KITS
A limited supply of these archived reference designs still may be available. To learn if quantities are available in your area, please click on the reference design part number listed below, then select your region and click on “Check Availability.”
Reference Design Part Number Description
IRCS2277S IR2277S For 3-phase / 380V motor drives the IRCS2277S is designed to read 3-phase motor currents on top of pin-out compatible gate driver boards. The board can be used for both AC and Brushless motors current sensing by reading the voltage developed on shunt resistors.
IRMCS2031 IRMCK203 Complete Sensorless Drive Design Platform iMOTION Development System.
IRMCS2033 IRMCK203 Low Voltage Sensorless Drive Design Platform for Permanent Magnet Motors.
IRMCS2011 IRMCK201 Complete Encoder Based Servo Drive Design Platform iMOTION Develpment System.
IRMCS2013 IRMCK201 Encoder Based Low Voltage Servo Drive Design Platform.

 
Search
Submit
Part Search
Site Search
Applications
AC-DC
Appliances
Automotive 
DC-DC
Lighting
NetCom
A&D/HiRel
Audio
Desktop/Server
Enterprise Power
Motor Control
Portables

iMotion
Digital Control
Current Sensing ICs
Gate Driver ICs
IGBTs
Integrated Power Module

Appliances
  Washing Machines
  Refrigerators
  Pumps
  Air Conditioners
Industrial
  AC Motors
Aerospace & Defense
International Sites: | Chinese 简体中文 | Korean 한국어 | Japanese 日本語 |   About International Rectifier | Contact Us | Privacy   
©1995-2010 International Rectifier