INTERNATIONAL RECTIFIER - THE POWER MANAGEMENT LEADER
Lighting Reference Designs
International Rectifier offers a wide range of reference designs for Lighting applications. Each reference design kit includes a fully assembled and tested demo board along with applicable datasheets and application notes.

FEATURED KITS
IRPLLED13
90-250V AC input voltage LED Driver
  • Featuring IRS2980S HVIC LED driver
  • Non-isolated constant current buck regulator
  • 90-250V AC input voltage
  • 0-50V DC output voltage
  • Nominal output current of 350mA
IRPLLED5
40V/1.4A Low Voltage LED Driver
  • Featuring IRS2548DSPBF An LED Driver PFC plus Half-Bridge Control IC
  • High output current regulation
  • 90-305VAC universal input
  • Dimmable with 1-10V DC input
  • Non-latched shutdown against output over-voltage
  • Using IRS2548DS LED control IC
IRPLHID2
HID Ballast for 70W Lamp
  • Featuring IRS2573 HID Ballast Control IC
  • Drives 1 x 70W HID lamp
  • Input voltage range: 185-265 VAC
  • High Power Factor / Low Total Harmonic Distortion
  • Controlled ignition
  • Low frequency square wave operation
  • Lamp power and current control
  • Open circuit and no-lamp protection
  • Short circuit and lamp failure to warm-up protection
  • Lamp end-of-life shutdown
IRPLDIM3
Wide Range Input Linear Dimming Fluorescent Ballast
  • Featuring IRS2158D HVIC ballast controller
  • Drives 1 x 28W TL5 Lamp
  • Input Voltage: 90-305Vac
  • High Power Factor/Low THD
  • High Frequency Operation
  • Lamp Filament Preheating
  • Lamp Fault Protection with Auto-Restart
  • Low AC Line/Brownout Protection
  • End of Lamp Life Shutdown
IRPLDIM4E
Miniature Dimmable 26W Ballast
  • Featuring IRS2530D DIM8™ HVIC ballast controller
  • Closed-loop dimming control
  • Programmable preheat time
  • Frequency sweep for filament preheat and lamp ignition
  • Open filaments and no-lamp protection
  • Failure to strike and deactivated-lamp protection
  • Low AC line protection
  • Lamp exchange auto restart
IRPLDIM5E
4 Level Switch Dim Fluorescent Ballast
  • Featuring IRS2530D DIM8™ HVIC ballast controller
  • Drives 25-26W CFL Lamp
  • Input Voltage: 220Vac
  • High Frequency Operation
  • Lamp Filament Preheating
  • Lamp Fault Protection with Auto-Restart
  • Low AC Line/Brownout Protection
  • Microcontroller driven 4 level power pulse dimming
IRPLCFL8U
Three Level Dimming CFL Fluorescent Ballast
  • Featuring IRS2530D DIM8™ HVIC ballast controller
  • Drives 1 x 32W Spiral CFL Lamp
  • Input Voltage: 120Vac
  • High Frequency Operation
  • Lamp Filament Preheating
  • Lamp Fault Protection with Auto-Restart
  • Low AC Line/Brownout Protection

Reference Design Part Number Description
IRPLCFL3 IR2156 A ballast that can be dimmed from a domestic (phase cut) dimmer.
IRPLLED1A IRS25401 High-voltage DC-DC buck converter for HB-LEDs constant current control
IRPLLED7 IRS2980S 90-250V AC input voltage LED Driver
IRPLLNR5 IRS2168D Universal Input Linear Fluorescent Ballast for 54W TL5 Lamp
IRPLLNR7 IRS2166D Universal Input Linear Fluorescent Ballast for 35W TL5 Lamp
IRMAGREP1 IRS2538D 220V Magnetic Ballast Replacement

ARCHIVED KITS
A limited supply of these archived reference designs still may be available. To learn if quantities are available in your area, please click on the reference design part number listed below, then select your region and click on “Check Availability.”
Reference Design Part Number Description
IRPLCFL2 IR2156 42W, single, compact fluorescent lighting ballast, IR2156 100/220VAC
IRPLCFL5E IR2520D CFL Ballast for 26W/Spiral Lamp, 220VAC Input
IRPLCFL5U IR2520D CFL Ballast for 26W/Spiral Lamp, 120VAC Input
IRPLCFL6 IR2166 High Power CFL for 60W-12W, 100-250VAC Input
IRPLDIM2U IR21592 Digital dimming DALI (Digital Addressable Lighting Interface) compliant lighting linear ballast with 1% dimming, IR2159, U.S. version, 120VAC line, 32W/T8 lamp
IRPLHALO1E IR2161 Halogen Convertor, 220/230VAC Input, 12VAC Output, 100VA Max
IRPLLNR3 IR2167 Universal Input Linear Fluorescent Ballast using the IR2167
IRPLMB1E IR2520D Mini-ballast for single 25W compact fluorescent ballast, European version with 230VAC in

 
Search
Submit
Part Search
Site Search
Applications
AC-DC
Appliances
Automotive 
DC-DC
Lighting
NetCom
A&D/HiRel
Audio
Desktop/Server
Enterprise Power
Motor Control
Portables

Fluorescent Lighting Solutions
  Fixed Output
  Dimming
Halogen Lighting Solutions
HID Lighting Solutions
  Industrial Full-Bridge
  Industrial Half-Bridge
LED Lighting Solutions
Gate Driver ICs

Ballast Design Software
Technical Papers
Application Notes
Design Tips
Reference Designs
Lighting FAQs
Technical Assistance Center
Sales Rep
International Sites: | Chinese 简体中文 | Korean 한국어 | Japanese 日本語 |   International Rectifier | Contact Us | Privacy | Terms of Use   
©1995-2014 International Rectifier