template irg4pc50fd c g e #************************************* # Model Generated by MODPEX * #Copyright(c) Symmetry Design Systems* # All Rights Reserved * # UNPUBLISHED LICENSED SOFTWARE * # Contains Proprietary Information * # Which is The Property of * # SYMMETRY OR ITS LICENSORS * #Commercial Use or Resale Restricted * # by Symmetry License Agreement * #************************************* # Model generated on Mar 13, 01 # MODEL FORMAT: Saber # Symmetry IGBT Model (Version 1.0) electrical c,g,e { # BODY_BEGIN # Default values used in MS: # The voltage-dependent capacitances are # not included. Other default values are: # LD=0 CBD=0 CBS=0 CGBO=0 spm..model ms=(type=_n,level=1, vto=6,kp=1.43492,lambda=0.625287,rs=0.000996656, rd=0.000977651,cgso=3.89883e-05) spd..model ddd4pc50f=( is=6.53076e-09,rs=0.0228005,n=2,eg=0.6, xti=0.500186,bv=600,ibv=0.00025,cjo=1.16126e-08, vj=1.5,m=0.638969,fc=0.5,tt=1.7512e-08, kf=0,af=1) spq..model qsub=(type=_p, is=1.55191e-17,bf=23.5373,nf=0.85,vaf=131.421, ikf=1172.87,ise=9.99937e-12,ne=2.00092,br=1.04218, nr=0.999653,var=101.051,ikr=999.976,isc=3.7297e-12, nc=1,rb=0.00867835,irb=990.164,rbm=0.00867835, re=0.000648409,rc=0.000998116,xtb=0,xti=3.01201, eg=1.2,cjc=8.09777e-10,vjc=0.4,mjc=0.340876, cje=1.61955e-08,vje=0.4,mje=0.9,tf=9.99999e-10) # Default values used in DCAP: # RS=0 EG=1.11 XTI=3.0 TT=0 # BV=infinite IBV=1mA spd..model dcap=(is=1e-32,n=50, cjo=6.71681e-09,vj=0.4,m=0.9,fc=0.5) # Default values used in DL: # EG=1.11 XTI=3.0 TT=0 CJO=0 # RS=0 BV=infinite IBV=1mA spd..model dl=(is=1e-10,n=0.4) spm.m1 n7 n6 n4 n4 =model=ms,l=100u,w=100u spq.q1 n4 n7 c c=model=qsub,off=1 spr.rds n7 n4 =1e8 spr.rer n4 e =0.0137988 spr.rg n6 g =2 spr.rl n10 n11 =1 spd.d2 n12 n11 =model=dcap spd.d3 0 n11 =model=dl spv.vfi2 n12 0 =0 spf.fi2 n6 n7 i(spv.vfi2) =-1 spe.ev n10 0 n7 n6 =1 spc.cap n10 n13 =6.71681e-09 spr.rcap n10 n14 =1 spd.d4 0 n14 =model=dl spv.vfi1 n13 n14 =0 spf.fi1 n6 n7 i(spv.vfi1) =-1 spd.body e c = model=ddd4pc50f }