template irg4bc40w c g e #************************************* # Model Generated by MODPEX * #Copyright(c) Symmetry Design Systems* # All Rights Reserved * # UNPUBLISHED LICENSED SOFTWARE * # Contains Proprietary Information * # Which is The Property of * # SYMMETRY OR ITS LICENSORS * #Commercial Use or Resale Restricted * # by Symmetry License Agreement * #************************************* # Model generated on Oct 29, 97 # MODEL FORMAT: Saber # Symmetry IGBT Model (Version 1.0) electrical c,g,e { # BODY_BEGIN # Default values used in MS: # The voltage-dependent capacitances are # not included. Other default values are: # LD=0 CBD=0 CBS=0 CGBO=0 spm..model ms=(type=_n,level=1, vto=5.8,kp=1.14091,lambda=0.0961203,rs=0.000785055, rd=0.00100258,cgso=1.85321e-05) spq..model qsub=(type=_p, is=1.23095e-16,bf=9.57188,nf=0.880662,vaf=87.1496, ikf=0.158082,ise=1.10548e-11,ne=1.3347,br=0.904756, nr=1,var=94.4112,ikr=1000,isc=1e-11, nc=2,rb=0.143053,irb=786.068,rbm=0.00983711, re=0.00110335,rc=0.00099916,xtb=0,xti=2.99726, eg=1.06369,cjc=1.35539e-09,vjc=2.01329,mjc=0.9, cje=2.71077e-08,vje=0.4,mje=0.9,tf=1.74015e-08) # Default values used in DCAP: # RS=0 EG=1.11 XTI=3.0 TT=0 # BV=infinite IBV=1mA spd..model dcap=(is=1e-32,n=50, cjo=4.39251e-09,vj=0.4,m=0.9,fc=0.5) # Default values used in DL: # EG=1.11 XTI=3.0 TT=0 CJO=0 # RS=0 BV=infinite IBV=1mA spd..model dl=(is=1e-10,n=0.4) spm.m1 n7 n6 n4 n4 =model=ms,l=100u,w=100u spq.q1 n4 n7 c c=model=qsub,off=1 spr.rds n7 n4 =1e8 spr.rer n4 e =0.0005 spr.rg n6 g =9.82966 spr.rl n10 n11 =1 spd.d2 n12 n11 =model=dcap spd.d3 0 n11 =model=dl spv.vfi2 n12 0 =0 spf.fi2 n6 n7 i(spv.vfi2) =-1 spe.ev n10 0 n7 n6 =1 spc.cap n10 n13 =5.84934e-09 spr.rcap n10 n14 =1 spd.d4 0 n14 =model=dl spv.vfi1 n13 n14 =0 spf.fi1 n6 n7 i(spv.vfi1) =-1 }