IR's Mx Series Platform Simplifies Satellite Power Design

New Platform-Based Design Approach Provides Simple Custom Configuration

EL SEGUNDO, Calif. - International Rectifier, IR® (NYSE: IRF), a world leader in power management technology, today introduced the Mx series triple output DC-DC power converter design platform for space applications powering specific RF communication satellite applications.

The Mx series offers industry-leading space ruggedness and low noise power performance in an open board assembly construction. The converters can be configured to meet a range of spacecraft power bus voltages, varying output load requirements, and telemetry needs, and are optimized to ensure maximum performance for sensitive RF equipment onboard spacecraft, such as receivers, transmitters, beacons, low noise amplifiers (LNAs), and up/down converters.

"The Mx series exemplifies our platform-based approach to satellite space power designs. By providing all of the benefits of a high volume standard product while offering the customization necessary for unique satellite power requirements, the overall cost and design effort for satellite manufacturers is reduced by simplifying custom power converter development," said Bjarne Soderberg, IR's director of technical marketing for Aerospace and Defense (A&D).

Product Details

The Mx series offers two power levels. The MA platform is rated at 5W and the MB platform is rated at 15W output power. The platform has three outputs; each output can be configured from 3.3V to 15V and independently regulated to eliminate cross talk and minimize noise. Output noise is less than 1mVRMS and conducted susceptibility (CS) rejection is better than 95dB. In addition to very low input/output noise characteristics and world class CS rejection performance, the design platform offers guaranteed output voltage accuracy and end-of-life output voltage variations of less than 2 percent.

The Mx series can accommodate common satellite power buses from 20V to 100V. An input filter is included to meet stringent EMI requirements. Isolated telemetry (TM)/tele-command (TC) interface and output turn-on/turn-off sequencing (normally required by RF amplifiers) capability are also offered.

In addition, the platform offers long term mission life with total ionizing dose (TID) and single event effects (SEE) requirements equal to GEO 15 Years and 38 MeV-cm2/mg, respectively.


Parameter Performance
Input DC-Bus Voltage 28V unregulated; 50V, 70V, 100V regulated
Input Under Voltage Protection Automatic shutdown if input drops below a threshold.
Auto restart or UVP latch is possible. ±1V hysteresis
Output 1 Vout: 3 to 15V fixed
±1% initial setting & temperature BOL
±2% EOL radiation and aging
Iout: 0 to 1000 mA, 6W max
Output 2 Vout: 6 to 15V fixed
±1% initial setting & temperature BOL
±2% EOL radiation and aging
Iout: 0 to 1000 mA, 6W max
Output 3 Vout: -2 to -15V fixed
±1% initial setting & temperature BOL
±2% EOL radiation and aging
Iout: 0 to 1000 mA, 4W max
Output Power 5W max for MA assembly outline
15W max for MB assembly outline
Mechanical Properties
Size MA: 85mm x 61mm x 19.5mm or 3.346"x2.402"x0.77" (LxWxH)
MB: 152.4mm x 50.8mm x 18mm or 6"x 2"x 0.71" (LxWxH)
Mass MA: 75 grams max.
MB: 130 grams max.

Support Documents